CDCVF857DGGRG4 Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 48 terminations can be found in frequency synthesizer. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. SSTL-2 is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 2.7V. The supply voltage for this frequency synthesizer should be kept above 2.3V for safety considerations. Clock PLL works with 2.3V~2.7V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This electronic component can be classified as a PLL Clock Driver. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. According to the base part number CDCVF857, its related parts can be found. There is an available 48 pin on the clock generators. RF synthesizers can handle voltages up to 2.5V. And basically, this clock generator is often classified as a kind of Clock Drivers. Clock PLL is facilitated with 10 signal outputs to magnify output frequency as high as possible. This clock generator offers low timing skew at 0.04 ns Max. You can find similar clock generators by searching for the 857 family. Frequency generator is able to reali220MHze high efficiency when operating at a frequency of 220MHz. The TR package suits this RF synthesizer ideally.
CDCVF857DGGRG4 Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CDCVF857DGGRG4 Applications
There are a lot of Texas Instruments
CDCVF857DGGRG4 Clock Generators applications.
- Instrument
- Automatic test equipment
- Wide area power system
- Digital circuits
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
