CDCVF2505DRG4 Overview
This clock IC is packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. 8 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. This clock generator receives its inputs from LVTTL, which is designed to be the clock source. It is possible to access the full performance of the electrical part by implementing 1 circuits. With the Surface Mount, it is easy to install this electric component on the panel. It would be possible to supply this clock PLL with 3.6V of power. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. The related electrical components for the base part number CDCVF2505 can be found below. It is possible to connect to the frequency generators via 8 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. As a result, it is commonly classified as a type of Clock Drivers clock PLL. Clock PLL is facilitated with 4 signal outputs to magnify output frequency as high as possible. At frequencies of 200MHz, RF synthesizer achieves high efficiency. In this case, we are referring to the load capacitance which is 25pF. A clock generator ic such as this would be well suited to the TR package.
CDCVF2505DRG4 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF
CDCVF2505DRG4 Applications
There are a lot of Texas Instruments CDCVF2505DRG4 Clock Generators applications.
- Electronic countermeasures
- Computers to manage memory cards
- Automatic control
- Digital logic circuits
- Infotainment systems
- Clock recovery
- 10 Gigabit Ethernet
- Wide area power system
- Quenching?
- Skew suppression
