Welcome to Hotenda.com Online Store!

logo
userjoin
Home

CDCF5801ADBQRG4

CDCF5801ADBQRG4

CDCF5801ADBQRG4

Texas Instruments

3.3V PLL Multiplier/Divider 280MHz CDCF5801 Clock Generators 24 Pins 24-SSOP (0.154, 3.90mm Width) 24 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)

SOT-23

CDCF5801ADBQRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 8 Weeks
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact PlatingGold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SSOP (0.154, 3.90mm Width)
Number of Pins 24
Weight 129.500622mg
Operating Temperature-40°C~85°C
PackagingTape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part StatusActive
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 24
Type PLL Multiplier/Divider
Additional FeatureDIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE
Subcategory Clock Drivers
Packing Method TR
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch0.64mm
Frequency 240MHz
Base Part Number CDCF5801
Output HSTL, LVDS, LVPECL, LVTTL, SSTL
Pin Count24
Number of Outputs 1
Operating Supply Voltage3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Nominal Supply Current75mA
Frequency (Max) 280MHz
Input HSTL, LVPECL, LVTTL
Ratio - Input:Output 1:1
Max I(ol) 0.04 A
PLL Yes
Differential - Input:Output No/Yes
Divider/Multiplier Yes/Yes
fmax-Min 280 MHz
Height 1.75mm
Length 8.65mm
Width 3.9mm
Thickness 1.5mm
Radiation HardeningNo
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:4499 items

CDCF5801ADBQRG4 Product Details

CDCF5801ADBQRG4 Overview


This clock IC is packaged using the Tape & Reel (TR) method. Clock PLL is embedded in the 24-SSOP (0.154, 3.90mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 24 terminations can be found in frequency generators. This clock generator ic should receive a voltage of 3.3V. This Clock PLL will be fed by HSTL, LVPECL, LVTTL as its input. The frequency generator has a maximum frequency of 280MHz. The Surface Mount allows this electrical component to be easily installed on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. The supply voltage (Vsup) should be kept above 3V for normal operation. There should be 3V~3.6V provided with this RF synthesizer. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. I would like to present to you a frequency synthesizer that is compatible with HSTL, LVDS, LVPECL, LVTTL, SSTL logic levels. This electronic component can be classified into PLL Multiplier/Divider. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. According to the base part number, its related parts can be founded. The frequency generator is equipped with 24 pins. The supply voltage should be maintained at 3.3V for high efficiency. A Clock Drivers clock generator is essentially what this device is. The RF synthesizer features DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE for improved clock signal output. The output frequency can be amplified as high as possible with its 1 signal outputs. At 240MHz, frequency synthesizer achieves high efficiency. The TR package suits this RF synthesizer ideally.

CDCF5801ADBQRG4 Features


Available in the 24-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCF5801ADBQRG4 Applications


There are a lot of Texas Instruments CDCF5801ADBQRG4 Clock Generators applications.

  • FPGA and processor clocks
  • Electronic countermeasures
  • Tracking filters
  • Digital circuits
  • Local oscillators (LOs)
  • Automatic control system test
  • Instrument
  • Wireless infrastructure
  • Myriad digital applications
  • Pagers

Get Subscriber

Enter Your Email Address, Get the Latest News