CDCF5801ADBQG4 Overview
Clock ICs are packaged using the Tube method. Clock PLL is embedded in the 24-SSOP (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As you can see, it consists of 24 terminations. The supply voltage of 3.3V allows for high efficiency. This clock generator receives its inputs from HSTL, LVPECL, LVTTL, which is designed to be the clock source. 280MHz is the maximal value for normal operation. Because of the Surface Mount, clock PLL can be easily mounted on the panel. 3.6V would be the maximum supply voltage for this clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. HSTL, LVDS, LVPECL, LVTTL, SSTL is designed for clock generator's output. An electrical part such as this one can be classified as a PLL Multiplier/Divider component. This clock-generating IC is a 24-bit device designed explicitly for microprocessors. It is possible to find its related electronic parts by searching for the base part number CDCF5801. Clock generator is designed with 24 pins. Time clock generator can handle a voltage of 3.3V as the supply voltage. Fundamentally, this is a kind of Clock Drivers clock PLL. With DIFFERENTIAL/SINGLE-ENDED OUTPUT AVAILABLE, this clock generator produces better clock signals. 1 signal outputs are provided for enhancing output frequency as much as possible. High efficiency is achieved when operating at a frequency of 240MHz. In this RF synthesizer operation, 75mA of current are supplied.
CDCF5801ADBQG4 Features
Available in the 24-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDCF5801ADBQG4 Applications
There are a lot of Texas Instruments CDCF5801ADBQG4 Clock Generators applications.
- High-speed optical transport network (OTN)
- Clock synchronization
- Peripheral devices
- Bluetooth transmitters
- Microwave backhaul IF
- Modems
- Pagers
- Picocells, femtocells and small cells
- Signal modulation and demodulation
- Microwave point-to-point systems
