CD74HCT74ME4 Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tube package. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -55°C~125°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74HCT series. It should not exceed 50MHzin terms of its output frequency. A total of 14 terminations have been made. It is a member of the 74HCT74 family. The power source is powered by 5V. JK flip flop input capacitance is 10pF farads. In terms of electronic devices, this device belongs to the HCTfamily of devices. It is mounted in the way of Surface Mount. There are 14pins on it. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchbase part number family. The superior flexibility of this circuit is achieved by using 2 circuits. There are 5V power supplies attached to it. For high efficiency, the supply voltage should be set to 5V. There are 1 output lines in this JK flip flop. It consumes 4μA current.
CD74HCT74ME4 Features
Tube package
74HCT series
14 pins
5V power supplies
CD74HCT74ME4 Applications
There are a lot of Texas Instruments CD74HCT74ME4 Flip Flops applications.
- Common Clocks
- Data transfer
- Dynamic threshold performance
- Single Up Count-Control Line
- Balanced 24 mA output drivers
- Consumer
- Guaranteed simultaneous switching noise level
- Asynchronous counter
- Reduced system switching noise
- Buffered Clock
