CD74HCT4066MT Overview
Packed in 14-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around -55°C~125°C TA is the extended operating temperature. A total of 14 terminations have been recorded. Due to its 4 channels, the electrical component produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. A total of 14 pins are injected into the electrical part body. The analog switch ics are built using SPST - NO switching circuits. Try searching with 74HCT4066 to find analog multiplexer variants. A 95Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 14 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. 4.5V should be the lowest voltage fed to the electronic component. The voltage required by this switch device is 4.5V~5.5V, draining from a single voltage supply. If you put voltage higher than 2μA on the digital multiplexer, damage may occur. 5V operating voltages can be used with this electrical part. There are 200MHz bandwidths for data transfer.
CD74HCT4066MT Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
CD74HCT4066MT Applications
There are a lot of Texas Instruments CD74HCT4066MT Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Intelligent PBX
- Avionics and Military Systems
- Automatic test equipment
- Industrial and process control systems
- Sample hold systems
- Frame Relay Equipment
- DSLAMs
- Communications systems
- PCMCIA cards
