MAX4543EUA Overview
The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. 8 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. An injection of 8 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. It consists of 2 circuits. Using the MAX4543 search parameter, you can discover variants of the switch. This digital multiplexer has 60Ohm internal resistance. For functions related to 8 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 2.7V. This analogue multiplexer requires a voltage of 2.7V~12V when it drains from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX4543EUA Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4543EUA Applications
There are a lot of Maxim Integrated MAX4543EUA Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Remote wireless modules
- PDH Multiplexers
- PDAs
- ATM
- Remote Powered Equipment
- Access Concentrators
- SDH
- Microwave transmission systems
- ISDN NT1/TA
