CD74HCT175MT Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Differential. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is operating at -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74HCT series. There should be no greater frequency than 25MHzon its output. A total of 1elements are present in it. It has been determined that there have been 16 terminations. This D latch belongs to the family of 74HCT175. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 10pF farads. It is a member of the HCTfamily of D flip flop. It is mounted by the way of Surface Mount. A total of 16pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. Flip flops designed with 4bits are used in this part. Despite its superior flexibility, it relies on 4 circuits to achieve it. On the basis of its reliable performance, this D flip flop is well suited for use with TR. A power supply of 5Vis required to operate it. Optimal efficiency requires a supply voltage of 5V. This T flip flop features a maximum design flexibility due to its output current of 4mA. It consumes 8μA of quiescent current without being affected by external factors.
CD74HCT175MT Features
Tape & Reel (TR) package
74HCT series
16 pins
4 Bits
5V power supplies
CD74HCT175MT Applications
There are a lot of Texas Instruments CD74HCT175MT Flip Flops applications.
- Buffered Clock
- Supports Live Insertion
- Counters
- Set-reset capability
- Memory
- Differential Individual
- Count Modes
- Latch-up performance
- Data Synchronizers
- Control circuits
