CD74HCT174MG4 Overview
SOICis the packaging method. A total of 1elements are present in it. A total of 16terminations have been recorded. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as HCT. There is an electronic part that is mounted in the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Considering its reliability, this T flip flop is well suited for TUBE. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. Quiescent current is consumed by the D latch in the amount of 8μA. Furthermore, it has DUMMY VALas a characteristic. A -4mAvalue is set for the high level output current. 4mA is the low level output current. A temperature below 125°Cis recommended for operation. It is recommended that the operating temperature be greater than -55°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 25MHz. The logic IC it uses is D FLIP-FLOP. As a result, it is equipped with 1 functions . This device is equipped with a pin count of 16.
CD74HCT174MG4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74HCT174MG4 Applications
There are a lot of Texas Instruments
CD74HCT174MG4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
