Name: CD74HC4316PWRE4
Brand: Texas Instruments
SKU: CD74HC4316PWRE4
Availability: InStock

new-10%

CD74HC4316PWRE4

Manufacturer part number:CD74HC4316PWRE4

Manufacturer:Texas Instruments

Description:37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:CD74HC4316PWRE4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	170Ohm
Additional Feature	ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4316
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	205 ns
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	205 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	170Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	37ns, 37ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Signal Current-Max	0.025A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4316PWRE4 Product Details

CD74HC4316PWRE4 Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. A total of 16 pins are injected into the electrical part body. A SPST - NO switching circuit is used for these analog switches. Using the 74HC4316 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 170Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 2V is the lowest voltage the electrical component should receive. Putting voltage greater than 16μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 5V. With dual power supplies, you should attach at least 1V. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. This electrical component also includes additional features such as ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.