Name: CD74HC4051QPWRG4Q1
Brand: Texas Instruments
SKU: CD74HC4051QPWRG4Q1
Price: 0.27000 USD
Availability: InStock

new-10%

CD74HC4051QPWRG4Q1

Manufacturer part number:CD74HC4051QPWRG4Q1

Manufacturer:Texas Instruments

Description:130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:CD74HC4051QPWRG4Q1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4051
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	16μA
Propagation Delay	8 ns
Turn On Delay Time	225 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Supply Current-Max (Isup)	0.32mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	225 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	340ns
Switch-off Time-Max	340ns
Normal Position	NC
Signal Current-Max	0.025A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4051QPWRG4Q1 Product Details

CD74HC4051QPWRG4Q1 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. There are 1 circuits in this switch device. Try searching with 74HC4051 to find analog multiplexer variants. An switch multiplexer with 130Ohm internal resistance has a value of 130Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. An operating current of 16μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 5V. It is recommended that you attach at least 1V to your dual power supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. Operating the 8 inputs requires 8 inputs. There are 180MHz bandwidths for data transfer. The series starts with Automotive, AEC-Q100.