CD74HC374M Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 60MHz Hz. In total, there are 1 elements. There are 20 terminations,Members of the 74HC374family make up this object. It is powered from a supply voltage of 4.5V. This T flip flop has a capacitance of 10pF farads at the input. It is a member of the HC/UHfamily of D flip flop. It is mounted by the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. This part is included in Bus Driver/Transceiver. Flip flops designed with 8bits are used in this part. Vsup reaches its maximum value at 6V. A normal operating voltage (Vsup) should remain above 2V. It runs on 2/6Vvolts of power. There are 2 ports embedded in the flip flops. The 7.8mA output current allows it to be designed with the greatest amount of flexibility. It operates with 3 output lines. Quiescent current is consumed by the D latch in the amount of 8μA. 8is the number of channels.
CD74HC374M Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC374M Applications
There are a lot of Texas Instruments CD74HC374M Flip Flops applications.
- Load Control
- Registers
- Automotive
- Patented noise
- Bus hold
- Frequency Dividers
- Asynchronous counter
- Matched Rise and Fall
- Buffered Clock
- Frequency Divider circuits
