74F823SC Overview
It is packaged in the way of 24-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tube package. Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74F series. A frequency of 160MHzshould be the maximum output frequency. D latch consists of 1 elements. There is 100mA quiescent consumption. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V is used as the power supply for this D latch. F/FASTis the family of this D flip flop. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. This D flip flop is equipped with 0 ports. As an additional reference, you may refer to electronic flip flop WITH CLEAR AND CLOCK ENABLE.
74F823SC Features
Tube package
74F series
74F823SC Applications
There are a lot of Rochester Electronics, LLC 74F823SC Flip Flops applications.
- Shift registers
- Clock pulse
- Computing
- Patented noise
- Parallel data storage
- Control circuits
- Buffer registers
- Computers
- Common Clocks
- Latch-up performance
