CD74AC374ME4 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. A voltage of 1.5V~5.5Vis required for its operation. Currently, the operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74ACseries of FPGAs. You should not exceed 125MHzin its output frequency. A total of 1elements are contained within it. Terminations are 20. If you search by 74AC374, you will find similar parts. It is powered from a supply voltage of 3.3V. This T flip flop has a capacitance of 10pF farads at the input. The electronic device belongs to the ACfamily. In this case, the electronic component is mounted in the way of Surface Mount. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. An electronic part with 8bits has been designed. As soon as 5.5Vis reached, Vsup reaches its maximum value. Despite its superior flexibility, it relies on 8 circuits to achieve it. A D flip flop with 2embedded ports is available. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. In order to operate, the chip has 3 output lines. It consumes 8μA current.
CD74AC374ME4 Features
Tube package
74AC series
20 pins
8 Bits
CD74AC374ME4 Applications
There are a lot of Texas Instruments CD74AC374ME4 Flip Flops applications.
- Memory
- Buffer registers
- Test & Measurement
- Data Synchronizers
- Individual Asynchronous Resets
- Dynamic threshold performance
- Control circuits
- Shift Registers
- Registers
- Shift registers
