M74HC73TTR Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. JK flip flop uses Negative Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. It is at -55°C~125°C TAdegrees Celsius that the system is operating. This D latch has the type JK Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 80MHz. Despite external influences, it consumes 2μAof quiescent current. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of M74HC73. A voltage of 4.5V provides power to the D latch. There is 5pF input capacitance for this T flip flop. Electronic devices of this type belong to the HC/UHfamily. It is mounted by the way of Surface Mount. It is designed with 14 pins. It has a clock edge trigger type of Negative Edge. This device has the base part number FF/Latches. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 2 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. Furthermore, it has MASTER SLAVE OPERATIONas a characteristic.
M74HC73TTR Features
Tape & Reel (TR) package
74HC series
14 pins
M74HC73TTR Applications
There are a lot of STMicroelectronics M74HC73TTR Flip Flops applications.
- Data transfer
- Registers
- Cold spare funcion
- QML qualified product
- Clock pulse
- Common Clocks
- Bus hold
- Frequency division
- High Performance Logic for test systems
- Single Up Count-Control Line
