CD4097BM Overview
As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. Total terminations are 24. The electronic part provides high-quality output because it has 2 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 24 pins. There are 2 circuits in this switch device. Try searching with CD4097 to find analog multiplexer variants. An switch multiplexer with 240Ohm internal resistance has a value of 240Ohm. Datasheets for 24 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 18V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 3V. An operating current of 80nA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 3V~18V volts. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. Operating the 16 inputs requires 16 inputs. There are 20MHz bandwidths for data transfer. It has a Drain to Source resistance of 125Ohm ohms. It conducts in a 8-bit manner.
CD4097BM Features
2 Channels
80nA Supply Current
Bandwidth: 20MHz
Drain-to-Source resistance: 125Ohm
8-Bit
CD4097BM Applications
There are a lot of Texas Instruments
CD4097BM Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
