Name: ADG1411YCPZ-REEL7
Brand: Hotenda
SKU: ADG1411YCPZ-REEL7
Price: 7.59000 USD
Availability: InStock

new-10%

ADG1411YCPZ-REEL7

Manufacturer part number:ADG1411YCPZ-REEL7

Manufacturer:Hotenda

Description:150ns, 120ns SPST - NC 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1411 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1411YCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.8Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.97mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1411
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	4.97mW
Max Supply Current	380μA
Turn On Delay Time	150 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	170MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.8Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	550pA
Channel Capacitance (CS(off), CD(off))	23pF 23pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	150ns, 120ns
Insertion Loss (dB)	-0.35 dB
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	510ns
Switch-off Time-Max	380ns
Normal Position	NC
Height Seated (Max)	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1411YCPZ-REEL7 Product Details

ADG1411YCPZ-REEL7 Overview

Packed in 16-VQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. Use ADG1411 to search for variants of the digital switches. This digital multiplexer has 1.8Ohm internal resistance. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 5V should be the lowest voltage fed to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 380μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. If you are using a dual power supply, you should attach at least 4.5V. This analog switch ic utilizes SEPARATE OUTPUT output. The electrical part can be operated at 12V voltage levels. In order to operate the 4 inputs, there are several steps to follow. There are 170MHz bandwidths for data transfer.