CD4076BM96 Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. It is included in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 3V~18V volts. A temperature of -55°C~125°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 4000Bseries contain this type of chip. You should not exceed 16MHzin the output frequency of the device. A total of 1 elements are present. Despite external influences, it consumes 20μAof quiescent current. It has been determined that there have been 16 terminations. Members of the CD4076family make up this object. It is powered by a voltage of 5V . This JK flip flop has a 5pFfarad input capacitance. The electronic part is mounted in the way of Surface Mount. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. This flip flop is designed with 4 Bits. For normal operation, the supply voltage (Vsup) should be above 3V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The JK flip flop is with 4 output lines to operate.
CD4076BM96 Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
CD4076BM96 Applications
There are a lot of Texas Instruments CD4076BM96 Flip Flops applications.
- Power down protection
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
- Balanced Propagation Delays
- Control circuits
- ESD protection
- Data transfer
- ESCC
- Circuit Design
- Registers
