MC74AC374N Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Through Hole. A 2V~6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. It should not exceed 155MHzin terms of its output frequency. The element count is 1 . Despite external influences, it consumes 8μAof quiescent current. It has been determined that there have been 20 terminations. It is a member of the 74AC374 family. Power is provided by a 5V supply. A JK flip flop with a 4.5pFfarad input capacitance is used here. It is a member of the ACfamily of D flip flop. The electronic part is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. As soon as 6Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. Its flexibility is enhanced by 8 circuits. A total of 2ports are embedded in the D flip flop. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It operates with 3 output lines.
MC74AC374N Features
Tube package
74AC series
20 pins
8 Bits
MC74AC374N Applications
There are a lot of ON Semiconductor MC74AC374N Flip Flops applications.
- ESD performance
- Computing
- Set-reset capability
- Control circuits
- Computers
- Load Control
- Patented noise
- Test & Measurement
- ESCC
- Latch
