BQ77PL900DLG4 Overview
This package corresponds to SSOP. POWER SUPPLY MANAGEMENT CIRCUIT is the analog IC used by this power management IC. It is possible to access 10 channels. The smart tools battery has 48 pins in total. It is recommended that this electric part's minimum supply voltage not be less than 7V volts. 50V voltage greater than 50V volts should be supplied to this electronic battery. You cannot activate this smart tools battery if it is less than -40°C. The electronic battery should be used below 100°C degrees Celsius. All times this battery protection IC should be set to 36V. 48 pins are present on it. Ensure that the maximum supply current (Isup) is below 0.8mA. A voltage of 975mV is output by the electronic battery.
BQ77PL900DLG4 Features
Available in SSOP Package
with 48 Pins
operate supply voltage at the range of 36V
BQ77PL900DLG4 Applications
There are a lot of Texas Instruments
BQ77PL900DLG4 Battery Management ICs applications.
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
