BQ29414PWG4 Overview
The package TSSOP is appropriate for battery instrument. This power management IC utilizes an analog IC POWER SUPPLY SUPPORT CIRCUIT. A total of 1 channels are available. 8 pins are on it. You can mount this electronic part by using Surface Mount. In order for this electric part to operate properly, its supply voltage must not be lower than 4V volts. There should be 25V voltage over 25V volts on the supply to this electronic battery. Activation of this smart tools battery requires a value greater than 0. It should be used at temperatures below 110°C. It is always recommended that this battery protection IC is set to 14V. The pins on it total 8. A maximum current supply (Isup) of 0.003mA is permitted. The output voltage of the electronic battery is 2V.
BQ29414PWG4 Features
Available in TSSOP Package
with 8 Pins
operate supply voltage at the range of 14V
BQ29414PWG4 Applications
There are a lot of Texas Instruments
BQ29414PWG4 Battery Management ICs applications.
- Golf carts
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
