BQ25015RHLRG4 Overview
A VQFN package would be appropriate for this. IC SWITCHING REGULATOR is the system battery's analog IC. Currently, there are 20 pins on it. Tape & Reel (TR) cases are used for packaging. A minimum supply voltage of 4.35V volts is required for this electric part. Power Management Circuits is a family of electronic parts. Ensure that the power management IC's supply voltage does not exceed 6.5V volts. It must be greater than -40°C to activate this system battery. Temperatures below 125°C are recommended. There is a 5V volt power source. It is recommended that this battery protection IC be set to 5V at all times. Total number of pins is 20. A device that uses this battery instrument can detect PFM MODE IS ALSO AVAILABLE. Unless specified otherwise, Isup (the maximum supply current) must not exceed 2mA. In this case, it produces 700mV voltage as an output. It is suitable to run the manage IC at a voltage below 4.5V.
BQ25015RHLRG4 Features
Available in VQFN Package
with 20 Pins
operate supply voltage at the range of 5V
BQ25015RHLRG4 Applications
There are a lot of Texas Instruments
BQ25015RHLRG4 Battery Management ICs applications.
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
- Solar and wind-generating plants
