BQ24001PWPG4 Overview
This package corresponds to HTSSOP EP. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this power management IC. It is possible to access 1 channels. The smart tools battery has 20 pins in total. It is recommended that this electric part's minimum supply voltage not be less than 4.5V volts. An electrical component of the type Power Management Circuits can be found here. 10V voltage greater than 10V volts should be supplied to this electronic battery. You cannot activate this smart tools battery if it is less than -40°C. The electronic battery should be used below 70°C degrees Celsius. All times this battery protection IC should be set to 5V. 20 pins are present on it. This battery instrument can be found to have OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE. A voltage of 4.2V is output by the electronic battery. There is 4.5V problem operating the manage IC below 4.5V voltage.
BQ24001PWPG4 Features
Available in HTSSOP EP Package
with 20 Pins
operate supply voltage at the range of 5V
BQ24001PWPG4 Applications
There are a lot of Texas Instruments
BQ24001PWPG4 Battery Management ICs applications.
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
