BQ2057CTSG4 Overview
This package corresponds to TSSOP. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this power management IC. It is possible to access 1 channels. The smart tools battery has 8 pins in total. It is recommended that this electric part's minimum supply voltage not be less than 4.5V volts. An electrical component of the type Power Management Circuits can be found here. 15V voltage greater than 15V volts should be supplied to this electronic battery. You cannot activate this smart tools battery if it is less than -20°C. The electronic battery should be used below 70°C degrees Celsius. All times this battery protection IC should be set to 5V. 8 pins are present on it. Ensure that the maximum supply current (Isup) is below 4mA. A voltage of 4.2V is output by the electronic battery. The system battery input voltage can be powered under 15V. There is 4.5V problem operating the manage IC below 4.5V voltage. Under 2A, it is recommended that you power the battery for battery safety.
BQ2057CTSG4 Features
Available in TSSOP Package
with 8 Pins
operate supply voltage at the range of 5V
BQ2057CTSG4 Applications
There are a lot of Texas Instruments
BQ2057CTSG4 Battery Management ICs applications.
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
