BQ2002CSNG4 Overview
A SOIC package would be appropriate for this. IC POWER SUPPLY SUPPORT CIRCUIT is the system battery's analog IC. The available channels are 1. Currently, there are 8 pins on it. Tube cases are used for packaging. A minimum supply voltage of 4V volts is required for this electric part. Ensure that the power management IC's supply voltage does not exceed 6V volts. For the electronic part to perform properly, it should be operated at temperature 0°C ~ 70°C (TA). A battery chemistry of Multi-Chemistry is used in this electronic part. It must be greater than 0°C to activate this system battery. Temperatures below 70°C are recommended. There is a 5V volt power source. It is recommended that this battery protection IC be set to 5V at all times. Total number of pins is 8. The model is based on the BQ2002 family. Unless specified otherwise, Isup (the maximum supply current) must not exceed 0.5mA. It is specified that the operating supply voltage for this battery instrument is 5V. The power IC's series corresponds to --. It is suitable to run the manage IC at a voltage below 4V. Under --, the battery should be powered for safety. 500μA volts of supply current power it.
BQ2002CSNG4 Features
Available in SOIC Package
with 8 Pins
Battery Chemistry : Multi-Chemistry
operate supply voltage at the range of 5V
BQ2002CSNG4 Applications
There are a lot of Texas Instruments
BQ2002CSNG4 Battery Management ICs applications.
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
- Solar and wind-generating plants
