74LVC1G3157DBVRE4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 6. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 2.3V, it should be turned on and run. Electronic part bodies are injected with 6 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with 74LVC1G3157. As far as internal resistance is concerned, it has 15Ohm. To find out what the 6 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexers or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. An effective Single supply digital multiplexer. It is recommended to use 1.65V as the lowest voltage for the electrical part. For this digital switch to work, 1μA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 10μA. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths. Multiplexer ics with 2 outputs are available.
74LVC1G3157DBVRE4 Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 300MHz
74LVC1G3157DBVRE4 Applications
There are a lot of Texas Instruments 74LVC1G3157DBVRE4 Analog Switches & Multiplexers ICs applications.
- Medical systems
- Industrial
- ISDN NT1/TA
- Routers
- Video switching
- Ultrasound
- Industrial control systems
- 65 V DACs
- Channel Banks
- Relay Replacement
