5962-9960101Q2A Overview
In the package, you will find a LCC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Rail/Tube case is used for delivering the op amp. During the past two weeks, there have been close to 20 terminations. A total of 20 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 20 pins on it. Op amp rates 8mV as input offset voltage. You should keep the voltage gain at 75.56dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -55°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. This electric component can work from a voltage of under 32V as far as supply voltage is concerned. A voltage of 9V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 16.5V volts when you conduct this part. In this case, * represents the instrumentation amplifiers' series number.
5962-9960101Q2A Features
20 Pins
supply voltage of 15V
75.56dB voltage gain
5962-9960101Q2A Applications
There are a lot of Texas Instruments
5962-9960101Q2A Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
