5962-9453402MCA Overview
Packaged in a CDIP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 3mV for this buffer op amp. 116.47dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. For the buffer op amp to operate properly, it must be above the temperature of -55°C degrees Celsius. No temperature greater than 125°C should be used. The operating supply voltage of the buffer op amp is rated at 15V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 15.5V. A high supply voltage of more than 3V is recommended for the instrumentation amplifier's supply voltage.
5962-9453402MCA Features
14 Pins
supply voltage of 5V
116.47dB voltage gain
5962-9453402MCA Applications
There are a lot of Texas Instruments
5962-9453402MCA Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
