STP16CPPS05XTTR Overview
In order to save board space, the led driver uses the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. Typically, LED drivers have 16 outputs.As far as mounting is concerned, Surface Mount is adopted.In this case, the result is a Linear with high efficiency.It is possible for the led driver ic to function normally at -40°C~125°C TA.As a result, it operates based on the frequency of 30MHz.The system operates with a termination of 0.The LED light driver has a base configuration of 24 pins.A voltage supply below 3V may cause undetermined failures.We estimate that there are 16 segments.This is mounted by Surface Mount.LED drivers are found under the base part number STP16C.It is acceptable to operate with a supply voltage of 5.5V.This device produces a voltage of 20V volts.24 pins are on the device.As a result, it can also be classified as Display Drivers.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.When the maximum supply current is less than 9.5mA, this device is able to provide high efficiency.There is no current that can be supplied to the load.
STP16CPPS05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
STP16CPPS05XTTR Applications
There are a lot of STMicroelectronics STP16CPPS05XTTR LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
- Street lighting
- General lighting
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for portable equipment
- Sports Facility Lighting
- Stage Lighting and Signage
- Industrial LED Lighting: Image Recognition Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
