STM809LWX6F Overview
It is mounted through 3 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3.3V volt supply. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. There are 3 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 15μA for the power management. It is always advisable to use STM809, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 15μA can be used.
STM809LWX6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM809LWX6F Applications
There are a lot of STMicroelectronics STM809LWX6F Voltage Supervisors applications.
- Transformer load monitoring equipment
- Cloud computing
- Satellite navigation
- Power distribution systems of CCU
- Fire equipment power monitoring system
- Insulation fault location system
- Precision measurement
- Power distribution systems of operating room
- FPGA design
- DSP
