MCP102-270E/TO Overview
There are 3 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Bulk. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 3 pins in it. There are 3 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThis power management is the recommended temperature range for the supervisors: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 1.75μA. For similar manage ics search of the manufacturer, you can always refer to MCP102, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.
MCP102-270E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP102-270E/TO Applications
There are a lot of Microchip Technology MCP102-270E/TO Voltage Supervisors applications.
- Multi-voltage system
- Military electronics
- Data storage applications
- Electrical fire monitoring system
- Power communication system
- Smartphones
- Linux and server computing
- Detection of phase loss
- Detection of phase sequence
- Fire equipment power monitoring system
