STM708SDS6F Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. IC management can only work with a supply voltage of 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. To find similar IC managements from the manufacturer, you can always search by STM708. There is a requirement for 3.3/5V power to power this power management. A maximum supply temperature of 60μA can be used with this power management.
STM708SDS6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM708SDS6F Applications
There are a lot of STMicroelectronics STM708SDS6F Voltage Supervisors applications.
- Telecommunications equipment
- Digitally controlled LDO regulators circuit
- Radar
- Computer applications
- WiFi router
- DVR
- Smart meter
- Power distribution systems of ICU
- Embedded computing
- Cloud computing
