MAX709SESA+T Overview
There are 8 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be NOT SPECIFIED. A supply voltage of 3V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. There are a total of 8 pins on power management. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using MAX709, the base power ics number.
MAX709SESA+T Features
Simple Reset/Power-On Reset type
MAX709SESA+T Applications
There are a lot of Maxim Integrated MAX709SESA+T Voltage Supervisors applications.
- Power distribution systems of operating room
- Efficient information transmission
- Detection of phase imbalance
- Satellite navigation
- Rechargeable batteries
- Refrigeration
- Battery-powered equipment
- Fire equipment power monitoring system
- Insulation fault location system
- FPGA design
