Name: STM708DS6F
Brand: STMicroelectronics
SKU: STM708DS6F
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	NICKEL PALLADIUM GOLD
Subcategory	Power Management Circuits
Max Power Dissipation	320mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	10
Base Part Number	STM708
Output	Push-Pull, Totem Pole
Pin Count	8
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	60μA
Max Supply Current	60μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active High/Active Low
Voltage - Threshold	4.38V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.25V
Max Reset Threshold Voltage	4.5V
Undervoltage Threshold	4.25V
Overvoltage Threshold	4.5V
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant

STM708DS6F Product Details

STM708DS6F Overview

There are 8 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. There are a total of 8 pins on power management. 8 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supervisor's supply current is specified to 60μA. It is always advisable to use STM708, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 60μA.