MAX6346UR38+ Overview
As you can see, this power management is mounted through 3 terminals. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In a 3V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. There are a total of 3 pins on power management. 3 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage.
MAX6346UR38+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
MAX6346UR38+ Applications
There are a lot of Maxim Integrated MAX6346UR38+ Voltage Supervisors applications.
- Medical-specific insulation monitor
- Detection of phase imbalance
- Network equipment
- Dash board
- Electrical fire monitoring system
- Battery cars
- Data storage applications
- Leakage current detection
- Power distribution systems of ICU
- Display equipment
