Name: STG3684QTR
Brand: STMicroelectronics
SKU: STG3684QTR
Availability: InStock

new-10%

STG3684QTR

Manufacturer part number:STG3684QTR

Manufacturer:STMicroelectronics

Description:50ns, 30ns SPDT 500mOhm QUAD Analog Switches BREAK-BEFORE-MAKE STG3684 16 Pins 10nA 2.7V 16-VFQFN Exposed Pad

Case Package:SOT-23

Datasheet:STG3684QTR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	500mOhm
Terminal Finish	Matte Tin (Sn) - annealed
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.12W
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Base Part Number	STG3684
Pin Count	16
Number of Outputs	4
Qualification Status	Not Qualified
Power Supplies	1.8/3.3V
Number of Channels	2
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	50nA
Power Dissipation	1.12W
Max Supply Current	50nA
Turn On Delay Time	70 ns
Supply Type	Single
Turn-Off Delay Time	45 ns
-3db Bandwidth	50MHz
On-State Resistance (Max)	500mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	0.06Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 30ns
Charge Injection	35pC
Channel-to-Channel Matching (ΔRon)	60m Ω
Crosstalk	-54dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Normal Position	NO/NC
Height Seated (Max)	1mm
Length	3mm
RoHS Status	ROHS3 Compliant

STG3684QTR Product Details

STG3684QTR Overview

The electronic component is convenient to ship overseas because it is packed in a 16-VFQFN Exposed Pad. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. As a result of its 2 channels, this electronic component provides high-quality output. An 2.7V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. Use STG3684 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 500mOhm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 4.3V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.65V should be applied to the electronic component. This multiplexer would work with 50nA current. Using only a single voltage supply, this analog switch requires 1.65V~4.3V voltage. If you put voltage higher than 50nA on the digital multiplexer, damage may occur. There are 4 outputs on the analogue multiplexer.