Name: DG612AEY-T1-E3
Brand: Vishay Siliconix
SKU: DG612AEY-T1-E3
Availability: InStock

new-10%

DG612AEY-T1-E3

Manufacturer part number:DG612AEY-T1-E3

Manufacturer:Vishay Siliconix

Description:55ns, 35ns SPST - NO 115Ohm Analog Switches BREAK-BEFORE-MAKE DG612 16 Pins 100pA 3V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG612AEY-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	547.485991mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	72Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATE WITH 5V AND 3V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DG612
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	1nA
Power Dissipation	640mW
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	55 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	720MHz
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 3pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	55ns, 35ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Switch-off Time-Max	50ns
Normal Position	NO
Height	1.55mm
Length	10mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG612AEY-T1-E3 Product Details

DG612AEY-T1-E3 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. There are 16 terminations totally. By its 1 channels, the electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 16 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Using the DG612 search parameter, you can discover variants of the switch. A 72Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 2.7V. The switch device would be able to operate with 1μA current. When the digital multiplexer is charged above 100μA, damage can occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. If you are using a dual power supply, you should attach at least 2.7V. There are SEPARATE OUTPUT outputs on this analog switch ic. A 4 input needs to be operated. There is also ALSO OPERATE WITH 5V AND 3V SUPPLY to look out for in this electronic part.