M74HCT374RM13TR Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74HCT series. In order for it to function properly, its output frequency should not exceed 50MHz. A total of 1elements are present in it. As a result, it consumes 4μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. This D latch belongs to the family of M74HCT374. The power supply voltage is 5V. This JK flip flop has a 5pFfarad input capacitance. This D flip flop belongs to the family of HCT. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. The superior flexibility of this product is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. A total of 2ports are embedded in the D flip flop. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It is designed with 3 output lines.
M74HCT374RM13TR Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
M74HCT374RM13TR Applications
There are a lot of STMicroelectronics M74HCT374RM13TR Flip Flops applications.
- Differential Individual
- CMOS Process
- Balanced Propagation Delays
- Load Control
- Bus hold
- Buffered Clock
- Control circuits
- Registers
- Data Synchronizers
- Modulo – n – counter
