MC74AC374DWR2 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74AC series. Its output frequency should not exceed 155MHz. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74AC374 family. A voltage of 5V is used as the power supply for this D latch. There is 4.5pF input capacitance for this T flip flop. ACis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. This board has 20 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with 8bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 2V. Its flexibility is enhanced by 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A D flip flop with 2embedded ports is available. There are no output lines on the JK flip flop.
MC74AC374DWR2 Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC374DWR2 Applications
There are a lot of ON Semiconductor MC74AC374DWR2 Flip Flops applications.
- Control circuits
- Computing
- Balanced 24 mA output drivers
- Reduced system switching noise
- Test & Measurement
- Matched Rise and Fall
- ATE
- Digital electronics systems
- EMI reduction circuitry
- Synchronous counter
