Name: ADG412BRU-REEL
Brand: Hotenda
SKU: ADG412BRU-REEL
Availability: InStock

new-10%

ADG412BRU-REEL

Manufacturer part number:ADG412BRU-REEL

Manufacturer:Hotenda

Description:175ns, 145ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE ADG412 16 Pins 250pA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG412BRU-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	35Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT APPLICABLE
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	NOT APPLICABLE
Base Part Number	ADG412
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Max Supply Voltage	25V
Min Supply Voltage	5V
Operating Supply Current	100pA
Power Dissipation	450mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	175 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	13.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	5pC
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG412BRU-REEL Product Details

ADG412BRU-REEL Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. The electrical component body receives 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Using the ADG412 search parameter, you can discover variants of the switch. This digital multiplexer has 35Ohm internal resistance. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 25V. An effective Dual, Single supply digital multiplexer. 5V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 100pA current. When the digital multiplexer is charged above 1μA, damage can occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. A dual power supply should have at least 13.5V voltage attached. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It can operate from 12V operating voltages. Don't miss this electronic component's additional features, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY.