M74HC377RM13TR Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~6V. Currently, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74HCseries of FPGAs. It should not exceed 66MHzin its output frequency. A total of 1 elements are present. As a result, it consumes 4μA quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The M74HC377 family contains it. The power supply voltage is 4.5V. A JK flip flop with a 5pFfarad input capacitance is used here. Devices in the HC/UHfamily are electronic devices. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 20. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop is designed with 8 Bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A total of 2/6V power supplies are needed to run it.
M74HC377RM13TR Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
M74HC377RM13TR Applications
There are a lot of STMicroelectronics M74HC377RM13TR Flip Flops applications.
- Registers
- Computing
- Supports Live Insertion
- Communications
- Asynchronous counter
- Set-reset capability
- Bus hold
- Divide a clock signal by 2 or 4
- Automotive
- Common Clocks
