SN74LVC1G79DCKT Overview
The flip flop is packaged in a case of 5-TSSOP, SC-70-5, SOT-353. You can find it in the Tape & Reel (TR)package. Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. A temperature of -40°C~125°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74LVC series. You should not exceed 160MHzin its output frequency. T flip flop consumes 10μA quiescent energy. It has been determined that there have been 5 terminations. The 74LVC1G79 family contains it. An input voltage of 1.8Vpowers the D latch. Its input capacitance is 4pFfarads. It is a member of the LVC/LCX/Zfamily of D flip flop. It is mounted by the way of Surface Mount. This board has 5 pins. There is a clock edge trigger type of Positive Edgeon this device. This part is included in FF/Latches. This flip flop is designed with 1 Bits. Using 1 circuits, it is highly flexible. As a result of its reliability, this D flip flop is ideally suited for TR. It runs on 3.3Vvolts of power. It offers maximum design flexibility with its output current of 32mA.
SN74LVC1G79DCKT Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G79DCKT Applications
There are a lot of Texas Instruments SN74LVC1G79DCKT Flip Flops applications.
- Asynchronous counter
- High Performance Logic for test systems
- Control circuits
- Frequency division
- Test & Measurement
- Single Down Count-Control Line
- Synchronous counter
- Computing
- Differential Individual
- Common Clocks
