M74HC175TTR Overview
16-TSSOP (0.173, 4.40mm Width)is the packaging method. The package Tape & Reel (TR)contains it. This output is configured with Differential. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. A temperature of -55°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74HC series. A frequency of 61MHzshould not be exceeded by its output. In total, it contains 1 elements. During its operation, it consumes 4μA quiescent energy. Currently, there are 16 terminations. The M74HC175family includes it. The D flip flop is powered by a voltage of 4.5V . JK flip flop input capacitance is 5pF farads. Electronic devices of this type belong to the HC/UHfamily. In this case, the electronic component is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. 4bits are used in its design. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 2V. Using 4 circuits, it is highly flexible. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. An electrical current of 2/6V volts is applied to it.
M74HC175TTR Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
2/6V power supplies
M74HC175TTR Applications
There are a lot of STMicroelectronics M74HC175TTR Flip Flops applications.
- Divide a clock signal by 2 or 4
- Circuit Design
- Single Down Count-Control Line
- Test & Measurement
- Data Synchronizers
- Dynamic threshold performance
- Consumer
- Latch
- ESD performance
- Frequency Divider circuits
