M74HC107M1R Overview
There is an embedded version in the package Tube. A total of 2elements are contained within it. There is an electronic component mounted in the way of Surface Mount. 14pins are included in its design. This device's clock edge trigger type is Negative Edge. It is designed with a number of bits of 2. Using 2 circuits, it is highly flexible. The JK flip flop is with 2 output lines to operate. The number of input lines is 4. In this case, the high level output current is set to -5.2 mA. 5.2 mAis set as the low level output current. There should be a temperature below 125 °Cduring operation. In order for the system to operate properly, the temperature should be higher than -55 °C. The RS flip flop is designed to operate with a minimal supply voltage of 2 VV. There is a maximum voltage support of 6 V. A total of 14 pins are present on this device.
M74HC107M1R Features
Tube package
14 pins
2 Bits
14 pin count
M74HC107M1R Applications
There are a lot of STMicroelectronics
M74HC107M1R Flip Flops applications.
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
