Welcome to Hotenda.com Online Store!

logo
userjoin
Home

M40Z300WMH6E

M40Z300WMH6E

M40Z300WMH6E

STMicroelectronics

3V28 Terminals 28-Pin M40Z Voltage supervisor2 Channels Min 2.7V Max 3.6V

SOT-23

M40Z300WMH6E Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets
Number of Pins 28
Operating Temperature-40°C~85°C TA
PackagingTube
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Additional FeatureIT CAN ALSO BE OPERATED FROM A 3V TO 3.6V SUPPLY
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 3V
[email protected] Reflow Temperature-Max (s) 40
Base Part Number M40Z
Output Open Drain or Open Collector
Pin Count28
Power Supplies3/3.3V
Number of Channels 2
Max Supply Voltage3.6V
Min Supply Voltage2.7V
Operating Supply Current 4mA
Nominal Supply Current4mA
Power Dissipation1W
Adjustable Threshold YES
Watchdog TimerNo
Reset Active Low
Voltage - Threshold 2.6V
Number of Voltages Monitored1
Min Reset Threshold Voltage 2.5V
Max Reset Threshold Voltage 2.7V
Input Current 4mA
Height 2.69mm
Length 18.49mm
Width 8.89mm
RoHS StatusNon-RoHS Compliant
In-Stock:4527 items

M40Z300WMH6E Product Details

M40Z300WMH6E Overview


There are 28 terminals on this power management that allow it to be mounted. Packaged in a Tube-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 2 channels. There are 28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 245 for the package during reflow. In a 3V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 28 pins on power management. 28 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 3.6V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 4mA is the recommended value. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use M40Z, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 3/3.3V volts of power.

M40Z300WMH6E Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
4mA operating supply current

M40Z300WMH6E Applications


There are a lot of STMicroelectronics M40Z300WMH6E Voltage Supervisors applications.

  • Power distribution systems of operating room
  • Consumer electronics
  • Radio
  • Network equipment
  • Important electronics for automotive protection
  • Power distribution systems of infant care room
  • DVR
  • Household appliances
  • Smart meter
  • Medical-specific insulation monitor

Get Subscriber

Enter Your Email Address, Get the Latest News