Name: LS404IDT
Brand: STMicroelectronics
SKU: LS404IDT
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	-40°C~105°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	LS404
Pin Count	14
Operating Supply Voltage	15V
Number of Channels	2
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	6V
Operating Supply Current	1.3mA
Nominal Supply Current	2mA
Power Dissipation	400mW
Output Current	23mA
Slew Rate	1.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	50nA
Output Current per Channel	23mA
Input Offset Voltage (Vos)	2.5mV
Gain Bandwidth Product	3MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	3000 kHz
Voltage Gain	100dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	700μV
Max Dual Supply Voltage	18V
Min Dual Supply Voltage	3V
Height Seated (Max)	1.75mm
Length	8.65mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LS404IDT Product Details

LS404IDT Overview

Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 2.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. Using a supply current of 1.3mA , this buffer op amp will be able to operate. Keeping the voltage gain at 100dB is the best course of action. The buffer amp consists of 4 circuits in total. 2 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 15V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 36V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 6V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 18V volts for this part.