KD1084D2M-R Description
Deliveries are in Tape & Reel cases. Packaged in a D2PAK case, the battery regulator IC is protected from damage during shipment. Basically, the voltage regulator chip is made up of 3 terminations. In this case, Adjustable represents the output type of the Voltage Regulated IC. As far as its current output is concerned, it stands at 5A. There are totally 3 pins on this chip. This IC regulator has a total of 1 outputs, which ensures a rapid, adequate performance when in use. This voltage regulator IC has a dropout voltage of 10 volts. There are 4 pins on the chip. The component shown here is a typical Other Regulators component. As you can see from the picture, the regulator IC is packed in a certain way. When operating at maximum output current, the regulator IC reaches 5A. It operates in the 10mA Quiescent Current state. You should use the regulator IC when the temperature is below 125°C. At the very least, the voltage regulator IC works with a -40°C operating temperature. Generally, this voltage regulator IC can output 1.263V volts on a system level.
KD1084D2M-R Features
1.5V dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing
The maximum operating temperature of -40°C
KD1084D2M-R Applications
There are a lot of STMicroelectronics KD1084D2M-R Linear Voltage Regulators applications.
Analog control systems
Portable telephone
Position detection
LCD backlight
Gateway module
Disk drivers
Smartcard
PLL (Phase-Locked Loop)
TVS diodes
DSP power
