HCF4076BEY Overview
It is packaged in the way of 16-DIP (0.300, 7.62mm). The package Tubecontains it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 3V~20V volts. In this case, the operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 4000Bseries FPGA. A frequency of 16MHzshould not be exceeded by its output. The list contains 1 elements. This process consumes 100μA quiescents. Terminations are 16. The object belongs to the HCF4076 family. Power is provided by a 5V supply. This JK flip flop has a 5pFfarad input capacitance. There is an electronic component mounted in the way of Through Hole. The electronic flip flop is designed with pins 16. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. The flip flop is designed with 4bits. Vsup reaches its maximum value at 20V. For normal operation, the supply voltage (Vsup) should be kept above 3V. It operates with 4 output lines. In addition, WITH HOLD MODE; WITH DUAL OUTPUT ENABLEis a characteristic of it.
HCF4076BEY Features
Tube package
4000B series
16 pins
4 Bits
HCF4076BEY Applications
There are a lot of STMicroelectronics HCF4076BEY Flip Flops applications.
- Consumer
- Data storage
- Synchronous counter
- Load Control
- Bounce elimination switch
- Functionally equivalent to the MC10/100EL29
- Modulo – n – counter
- Memory
- Set-reset capability
- Storage registers
