SN74ACT74DG4 Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. Package Tubeembeds it. As configured, the output uses Differential. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74ACTseries of FPGAs. A frequency of 210MHzshould not be exceeded by its output. This process consumes 2μA quiescents. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74ACT74family make up this object. It is powered by a voltage of 5V . The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the ACTfamily of D flip flop. Surface Mount mounts this electronic component. Basically, it is designed with a set of 14 pins. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Its flexibility is enhanced by 2 circuits. A total of 5V power supplies are needed to run it. For high efficiency, the supply voltage should be set to 5V. This T flip flop features a maximum design flexibility due to its output current of 24mA. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74ACT74DG4 Features
Tube package
74ACT series
14 pins
5V power supplies
SN74ACT74DG4 Applications
There are a lot of Texas Instruments SN74ACT74DG4 Flip Flops applications.
- Latch-up performance
- EMI reduction circuitry
- Automotive
- Reduced system switching noise
- Memory
- Patented noise
- Frequency Dividers
- Functionally equivalent to the MC10/100EL29
- Load Control
- Event Detectors
