74LVC374AMTR Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. -55°C~125°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74LVC series. In total, there are 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. Terminations are 20. The 74LVC374 family contains it. A voltage of 2.7V is used as the power supply for this D latch. JK flip flop input capacitance is 4pF farads. This D flip flop belongs to the family of LVC/LCX/Z. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. 8bits are used in its design. The maximal supply voltage (Vsup) reaches 3.6V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. The D flip flop has no ports embedded. This input has 8lines.
74LVC374AMTR Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
3.3V power supplies
74LVC374AMTR Applications
There are a lot of STMicroelectronics 74LVC374AMTR Flip Flops applications.
- Latch-up performance
- Modulo – n – counter
- Pattern generators
- Clock pulse
- CMOS Process
- Buffer registers
- ESCC
- QML qualified product
- Digital electronics systems
- Guaranteed simultaneous switching noise level
